Safety Instructions And Safety Points; Introduction; Introduction - Safety Instructions - Valtra T CVT Operator's Manual

2.1 Introduction

2.1.1 Introduction - Safety instructions

Operator's Manual
NOTE: This Operator's Manual is widely published and distributed and the availability of the attachments
indicated, whether fitted to the basic tractor or as an accessory, may vary depending on the country or
region in which the tractor is used. To find out which attachments are available in a given region, contact a
Valtra dealer.
The purpose of this manual is to enable the owner and the operator to operate the tractor appropriately
under normal conditions of use. Providing they follow the instructions carefully, the tractor will give many
years of service in the Valtra tradition.
Use for any other activity (particularly forestry work) is considered to be contrary to the intended use.
The commissioning of equipment by the Valtra dealer on the user's premises enables the dealer to ensure
that these operating and service instructions are properly understood. Always consult the Valtra dealer if
there is any part of this manual that you do not understand. It is important that these instructions are
understood and followed.
This manual does not cover all operation and safety instructions relevant to the implements and
accessories that may be fitted at the time of tractor delivery or later. It is essential that operators use and
understand the Operator's Manuals relating to these implements and accessories.
IMPORTANT: This manual must always be kept with the tractor. For extra copies, contact your Valtra
dealer.
This chapter in the Operator's Manual highlights certain basic safety-related situations that may be
encountered during normal operation and servicing of the tractor and provides the information needed to
handle these situations.
This chapter supplements any safety instructions given in other chapters of this manual.
It may be necessary to take additional precautions, depending on the implements and accessories used
and the working conditions on-site or in the service area. Valtra can under no circumstances exercise direct
control over the commissioning, operation, inspection, lubrication or servicing of the tractor. It is therefore
YOUR responsibility to take suitable safety precautions in such areas.
WARNING:
It is your responsibility to read and understand the instructions that appear in this chapter
before using the tractor.
They must then be strictly adhered to throughout the working day.
Servicing, spare parts, accessories and conditions of use
Daily servicing should become a routine, and a logbook of operating hours should be kept.
When spare parts are required, it is important to use only genuine Valtra parts. Valtra dealers supply
genuine parts and can offer advice concerning their fitting and use. The use of lower quality parts may
cause serious damage. Customers are advised only to purchase their spare parts from an approved Valtra
dealer. In the same way, you must only use accessories specifically adapted to your tractor.
Owing to the considerable variation in operating conditions, it is not possible for the manufacturer to
formulate complete or absolute assertions in its publications concerning the performance or operating
methods of its machines or to accept liability for any loss or damage which may result from such
assertions or possible errors or omissions.
If the tractor is to be used in abnormal conditions which could cause damage (use in deep water or in
paddy fields for instance), you should consult your Valtra dealer to obtain special instructions to prevent the
warranty from becoming void.
T CVT
ACW2071910

2. Safety instructions and safety points

[V]
GUID-71A89E4C-33F6-466C-A46F-9CE714A6823D [V1]
19