Sagitter BLAZER 1500S User Manual page 22

CUSTOM 3
CHANNEL
RESET
MANUAL
UPLOAD
TEST LED TEST
VERSION
TEMPERATURE T: xx°C
RDM UID
INFO
ERROR LIST
FIXTURE TIME
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
• Link together all the units from the connector DMX OUT to DMX IN.
• Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode.
• Operate the Master unit in Automatic mode or Static mode to operate the entire system.
The entire chain of Slave unit will act as the Master unit
LOAD Load custom 3 setting from memory
Save current fixture settings as custom
SAVE
3 and overwrite existing custom 3 data
000 - 255 Single channel manual control
CANCEL
OK Reset projector
CANCEL
OK Reset to factory setting
BEAM STATIC Test beam led
BEAM Test strobe beam led
STROBE
BEAM Test sector beam led
SECTOR
Vx.x Software version
xxxxxxxxxxxxx
xxxxxxxxxxx
Hours: xxxx Display total hours of operation of the
Minutes:xxxx projector
22