Table of Contents
Advertisement
Evoke™ Clinical Manual
Figure 10.3: Placing the top cover over the lead and sliding onto lead adapter until it clips
into place
4. Line up the end of the lead adapter plug with the end of the socket in the lead
adapter cable at an angle to ensure the connector pins do not get bent (Figure 10.4).
Push the lead adapter plug into the socket on the lead adapter cable until it clips into
place.
a. The lead adapter cable is labelled "1" on one side for electrodes 1-12 and "2"
on the other side for electrodes 13-24.
CLIN-UMAN-002424
Document Reference:
Revision: 12.00
Page 40 of 56
Advertisement
Table of Contents
