Table of Contents
Advertisement
Figure 7.11: Location of the Stimulation Settings Menu
1. Touch the Start Stimulation arrow
Note: The arrow will change orientation to an Up arrow
stimulation current, and various areas of the screen will become active, e.g. the
ECAP Measurement and Current rolling plot.
2. Touch the Up arrow
see Figure 7.12A).
3. Touch the Down arrow
Note: The current will increase/decrease by the Current Increment (mA) set. The
increment in the current scale is shown on the right side (Figure 7.12D). The scale
will extend to the Maximum current set (Figure 7.12B).
A
B
E
G
Figure 7.12: Features of the Stimulation Amplitude Control.
CLIN-UMAN-002424
Document Reference:
Evoke™ Clinical Manual
and Start Stimulation arrow on the CPA.
to increase stimulation current to the desired level (mA;
to decrease stimulation current (Figure 7.12G).
A: Up arrow
B: Maximum current
C: Current scale
C
D: Current increment scale
D
E: Desired current level
F: Current increment
F
G: Down arrow
Revision: 12.00
(see Figure 7.11).
Start
Stimulation
for increasing
Page 18 of 56
Advertisement
Table of Contents
