Table of Contents
Advertisement
CLIN-UMAN-002424
Document Reference:
Evoke™ Clinical Manual
EPC Mode Change
Soft Reset
Log Setup
Erase Space to Store
Data for ...
Start Data Acquisition
Stop Data Acquisition
Download Acq Data
Start Noise Check (6-11,
High) for ...
Download Noise Check
Data
Revision: 12.00
Enable or disable the ability to change the
Feedback Control (FC) mode with the EPC.
When EPC Mode Change is Enabled the FC
mode can be changed from the EPC.
When EPC Mode Change is Disabled the FC
mode cannot be changed from the EPC. To
indicate this, a padlock symbol is displayed
over the mode not in use.
When FC is Enabled
Reset stimulator, clear Safe Mode errors,
clear programs and reconnect
Set up therapy log settings:
Size: Normal (1.5 MB) or Research (13 MB)
Duration: 1 day to 1 year
Configure data acquisition for the specified
duration (1, 10 , 60 or 300s).
Acquire data.
Stop acquiring data.
Download acquired data from stimulator.
Start noise check between specified
electrodes (e.g.6-11), amplifier gain g(e.g.
High) and duration (0.1, 1, 5 s)
Download noise check data from stimulator
When FC is Disabled
Page 32 of 56
Advertisement
Table of Contents
