Table of Contents
Advertisement
Program
Slots
Save Slots
Figure 7.18: Location of the Program Slots and Save Slots on the CPA.
7.12.1 To add a new Program
1. Touch the desired Program Slot (see Figure 7.18); you will see a number
corresponding to that Program Slot appear in the box.
2. Select electrodes and change settings as required.
Note: If a program on the CPA has not been run on the stimulator (such as a new
program, or one that has been modified), it will be shown in red in the corresponding
Program Slot. Once a program has been run, its number will be shown in green (see
Figure 7.19), and it will be saved to the stimulator.
Program 3 not saved
Figure 7.19: (Left) Program 1 and 2 are saved on the stimulator while Program 3 is red
because it is not saved to the stimulator. (Right) Program 3 has been run and is now
green; all three programs are currently saved on the stimulator.
7.12.2 To copy settings from one Program to another
1. Drag the Program number to the desired Program Slot for the new Program.
CLIN-UMAN-002424
Document Reference:
Evoke™ Clinical Manual
All programs saved
Revision: 12.00
Page 22 of 56
Advertisement
Table of Contents
