Getting Help; Wpim-E1 Features - Enterasys WPIM-E1 Network Manual

CHAPTER 1: INTRODUCTION
The following list briefly explains each chapter of the WPIM-E1 manual:
Chapter 1, Introduction, outlines the contents of this manual, describes
WPIM-E1 features, lists specifications, and concludes with a list of
related manuals.
Chapter 2, Local Management, describes how to use Local Management
to setup the WPIM-E1.
Appendix A, WAN Interface Cable Specifications, provides Cabletron
part numbers and connector information for the interface cables used with
the WPIM-E1.
Appendix B, WAN Terms and Acronyms, is a brief glossary of the terms
used in this book.

1.2 GETTING HELP

If you need additional support related to the WPIM-E1, or if you have any
questions, comments, or suggestions concerning this manual, contact
Cabletron Systems Technical Support:
By phone ..........................(603) 332-9400
Monday-Friday; 8am - 8pm Eastern Time
By CompuServe ...............GO CTRON from any ! prompt
By Internet mail ...............support@ctron.com
By FTP .............................ctron.com (134.141.197.25)
Login: anonymous, Password: your email address

1.3 WPIM-E1 FEATURES

The WPIM-E1 extends the functionality of your Wide Area Network
module to allow remote connectivity using WAN services such as E-1 or
Fractional E-1.
The WPIM-E1 provides an E-1 interface that includes a built-in Channel
Service Unit/Digital Service Unit (CSU/DSU) for direct connection to an
E-1 line. This WPIM supports both Full E-1 or Fractional E-1 using 56 or
64 Kbps timeslots.
1-2 WPIM-E1 LOCAL MANAGEMENT