Table of Contents
Advertisement
CHAPTER 2: LOCAL MANAGEMENT
2.2.1
WAN Interface Configuration Screen Fields
This section describe the WAN Interface Configuration screen fields.
Interface Number
Displays the active Interface Numbers. Use this field to configure the
Interface Numbers you assigned to the Timeslots on the WAN Physical
Configuration screen.
Data Compression
Displays the status of Data Compression. This field displays YES or NO.
The default setting is
Max Xmit Unit
User-configured field that displays the maximum packet size that can be
transmitted on the selected Interface. The default values are 8191 for PPP
and 4095 for Frame Relay.
Line Coding
Displays the Line Coding for Timeslots associated with this interface.
This field displays JBZS, INV-HDLC, or None. The default setting is
None.
Active Protocol
Displays the active OSI Layer protocol. This field displays None,
FR (Frame Relay), or PPP (Point-to-Point). The default setting is None.
If you select PPP, the following field appears:
PPP Type:
If you select FR, the following field appears:
FR LMP
:
2-8
NO.
This field displays BNCP or LEX.
This field displays NO LMI, Q.933-A or
T1.617-D. This field is normally set to
Q.933-A (the European standard). The NO
LMI setting is for specialized applications in
which no Frame Relay Link Management is
available or required.
WPIM-E1 LOCAL MANAGEMENT GUIDE
Advertisement
Table of Contents
