Wpim-E1 Specifications - Enterasys WPIM-E1 Network Manual

WAN Protocols
As of this printing, the module in which the WPIM-E1 is installed
supports the following WAN protocols (refer to the Release Notes
included with the host MIM or standalone hub for a list of current
protocols):
• Point to Point Protocol (LCP ) as defined by RFC 1661
• Point to Point Protocol (BNCP) as defined by RFC 1638
• Point to Point Protocol LAN Extender (PPP/LEX)
• Frame Relay as defined by RFC 1490
MIB Support
Refer to the Release Notes included with the host MIM or standalone hub
for a list of all MIBs supported by the WPIM-E1. For information about
how to extract and compile individual MIBs, contact Cabletron Systems
Technical Support (see Getting Help).

1.4 WPIM-E1 SPECIFICATIONS

This section describes the environmental specifications and
safety/approval requirements for the WPIM-E1. Cabletron Systems
reserves the right to change these specifications at any time without
notice.
Environmental Requirements
Operating Temperature:
Non-operating Temperature: -30 to +90 C (-22 to 194 F)
Operating Humidity:
Safety
This unit meets the safety requirements of EN60950.
EMI
This unit meets the EMI requirements of EN55022 Class A and
VCCI Class I.
WPIM-E1 LOCAL MANAGEMENT GUIDE
WPIM-E1 SPECIFICATIONS
+5 to +40 C (41 to 104 F)
5% to 95% (non-condensing)
1-3