Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
To assemble High Chair...
1a.
1
1b.
1c.
1d.
1e.
1f.
1g.
To fix the Lower Legs...
1a.
1
1b.
1c.
1d.
1e.
1f.
6
Assemble the Height Adjusters onto the sides of
the Seat Assembly until they "click" into place. The
adjustment buttons should be facing the back of
the chair.
To open the leg assembly, press and hold
button(a) on both sides of frame whilst sliding the
legs outwards.
Release button to lock into place.
With the numbers on the leg facing forward, insert
the leg into the top of the seat height adjusters
until they "click" into place.
Repeat for other leg.
There are seven height adjustment levels.
To adjust the seat up or down, press and hold
the buttons on the seat height adjuster and lift or
lower seat to the desired height.
Release buttons at the desired height to lock into
place.
Lay the high chair on its back.
Please note that each of the four legs has a
spring loaded pin.
Locate the Rear Lower Leg. (The Rear Leg tubes
are longer than those of the Front Lower Leg).
Line up the rear lower leg so that the small hole in
the top of the leg aligns with the pin on the upper
leg.
Slide the lower leg onto the upper leg firmly at
both ends until each of the two spring pins click
into place.
Repeat steps 1d - 1e for the Front Lower Leg.
a
Advertisement
