Advertisement
Quick Links
Advertisement
Related Manuals for Childcare 360 044292
Summary of Contents for Childcare 360 044292
- Page 1 High Chair Model # 044292 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING BEFORE ASSEMBLING THIS HIGH CHAIR, READ AND UNDERSTAND THE INSTRUCTIONS. Follow the manufacturer’s instructions Do not leave children unattended. The harness must always be used and correctly fitted - most injuries from high chairs are caused by falls. - Page 3 SAFETY PRECAUTIONS FALLING HAZARD: Prevent your child from climbing on the product. Be aware of the risk of tilting when your child can push its feet against a table or any other structure. Read all instructions before assembly and use of the stool mode. Keep instructions for future use.
- Page 4 CONGRATULATIONS Congratulations on your purchase of the 360 High Chair This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 5 ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
- Page 6 ASSEMBLY CONTENTS Supplied loose in box continued: Leg Cross Brace (with Leg Cross 17mm Leg Bolts Brace Cap) 22mm Leg Allen Key Bracing Bolts There are no accessories recommended for use with this Childcare 360 High Chair.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble in High Chair Mode... Lay Seat flat on the floor face down. Insert 1 x Top Leg into the housing on the underside of the Seat Base. Secure with 1 x 17mm Leg Bolts. Repeat for remaining 3 x Top Legs.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble in High Chair Mode continued... Insert 2 x Footrest Bars into the footrest slots at the front of the chair. Insert 1 x Footrest onto the Footrest Bars. Insert 1 x Footrest Adjuster into the desired slot. Push down to secure into place.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To adjust the Footrest Positioner... NOTE: Footrest Positioner can be used in any of the three Footrest positioner slots. To remove the Footrest Positioner, push up and towards the Footrest until the positioner disengages. To fit the Footrest Positioner, insert into one of the designated slots and pull downwards until positioner engages.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Tray continued... To remove Tray, pull tray adjustment latches on both sides of Tray and slide away from the Chair. To remove Tray and Crotch Restraint assembly... The Tray (with Crotch Restraint attached) can also be removed as one complete piece.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To attach Tray and Crotch Restraint Assembly... Align and insert the Crotch Restraint sides into the corresponding cut-outs on the Seat. Once in place, pull the Crotch Restraint assembly release lever whilst guiding the Crotch Restraint into the corresponding cut-out in the Seat Base.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To use the Harness... CAUTION: The harness must be used at all times and be correctly adjusted. Most injuries from high chairs are caused by falls. Place baby in the seat. Attach shoulder straps to waist belt. Position the crotch strap between baby’s legs and feed arms through shoulder straps.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To remove Seat Pad continued... Unfasten the Seat Pad Elastic from the Footrest and remove the Seat Pad from the Seat. To assemble Double Sided Seat Pad... Choose which side of the Seat Pad you wish to display, place the Seat Pad onto the Seat.
- Page 14 ASSEMBLY / OPERATING INSTRUCTIONS To remove Harness for cleaning... Remove the D-ring from the ends of the harness strap by sliding the webbing through the slot in the D-ring. Push strap end through the slot in the seat and remove harness. NOTE: There are 5 harness attachment points.
- Page 15 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Stool Mode... Lay chair down flat on the floor. Locate the Seat Locking Nut in the centre of the Seat Base. Using a Spanner or Shifter (not supplied), remove this locking nut and washer. Stand Stool upright.
- Page 16 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Mini Stool Mode... Lay Stool down flat on the floor. Remove 4 x 22mm Leg Cross Brace Bolts and detach Leg Cross Brace from Stool. Remove the 4 x Bottom Legs from their housings. Replace these with 4 x Mini Stool Feet.
-
Page 17: Maintenance
HOW TO CARE FOR YOUR CHILDCARE HIGH CHAIR Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. - Page 18 These include distribution lines for Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
- Page 19 NOTES...
- Page 20 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands I: @cnp_baby...