Subscribe to Our Youtube Channel
Related Manuals for Childcare Pod Timber Natural
Summary of Contents for Childcare Pod Timber Natural
- Page 1 Pod Timber High Chair “Natural” Model # 095100-018 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
- Page 2 SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING FOLLOW THE MANUFACTURER’S INSTRUCTIONS. DO NOT LEAVE CHILDREN UNATTENDED. THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGH CHAIRS ARE CAUSED BY FALLS.
- Page 3 CONGRATULATIONS Congratulations on your purchase of the Pod Timber High Chair“Natural” This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 4 Front upper leg with pre-drilled Footrest holes Bolts (for footrest Rear upper leg assembly) Phillips Head screwdriver Bottom leg required (not supplied) There are no accessories recommended for use with this Childcare Pod Timber High Chair.
- Page 5 ASSEMBLY / OPERATING INSTRUCTIONS To fit Leg Base Mouldings and Footrest... Locate the two front upper legs. Ensure they are the legs that have the pre-drilled holes in the front of them. Line up the screw and the hole and turn clockwise until the leg is firm.
- Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To fit Leg Base Mouldings... Locate the two rear upper legs. Line up the screw and the hole and turn clockwise until the leg is firm. Do not over-tighten. Repeat for opposite side. The chair should resemble the image as shown. Locate the four bottom legs.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To attach Tray... PLEASE NOTE! The plastic tray can be adjusted and has three positions. To attach tray; align the tray with the arm rests, pull lever underneath the front of the plastic tray while sliding tray along armrests to desired position.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To convert to Low Chair Mode... The high chair can also be converted into a low chair by inserting the four bottom legs directly into the seat by turning clockwise until the legs are firm. Do not over-tighten. To use Harness Restraints...
- Page 9 HOW TO CARE FOR YOUR CHILDCARE HIGH CHAIR Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 10 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...
Need help?
Do you have a question about the Pod Timber Natural and is the answer not in the manual?
Questions and answers