Advertisement
Quick Links
Advertisement
Related Manuals for Childcare PIp 044333
Summary of Contents for Childcare PIp 044333
- Page 1 High Chair Model # 044333 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS Read all instructions before assembly and use of the high chair. Keep instructions for future use. WARNING BEFORE ASSEMBLY OF THE HIGH CHAIR, READ AND UNDERSTAND THE INSTRUCTIONS. FOLLOW THE MANUFACTURER’S INSTRUCTIONS. DO NOT LEAVE CHILDREN UNATTENDED. THE HARNESS MUST ALWAYS BE USED AND CORRECTLY FITTED - MOST INJURIES FROM HIGHCHAIRS ARE CAUSED BY FALLS. - Page 3 CONGRATULATIONS Congratulations on your purchase of the Pip High Chair. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 4 ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
- Page 5 In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. Supplied loose in box: Right Left Height Adjuster Height Adjuster Castors Footrest There are no accessories recommended for use with this Childcare High Chair.
- Page 6 ASSEMBLY / OPERATING INSTRUCTIONS To assemble High Chair... Assemble the Height Adjusters onto the sides of the Seat Assembly until they “click” into place. The adjustment buttons should be facing the back of the chair. To open the leg assembly, press and hold button(a) on both sides of frame whilst sliding the legs outwards.
- Page 7 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Castors... Whilst the chair is still on the floor, locate one Castor wheel. Insert the Castor into one of the castor holes on the bottom of a lower leg assembly. Push in until tight. Repeat steps 1b - 1c for the remaining 3 castor wheels.
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To fit Serving Tray... The tray can be stored on the back legs of the high chair. Align the holes on the rear of the tray with the small pegs on the back legs. Push down until secure. To assemble Footrest...
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To use the Harness... To remove harness remove metal rings from harness end, flatten the butterfly ends and pass through the slots in the seat (e). To refit the straps flatten the butterfly ends, pass the ends through the slots in the seat (e), then open the butterfly ends (d) and refit metal rings.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To adjust Seat Height and Recline... To adjust the angle of the seat, lift the plastic lever (b) (found on the back of the seat assembly) position as required, releasing the mechanism to secure into place. IMPORTANT! If the height adjustment becomes difficult after a period of use and as part of the regular maintenance routine, DO NOT use spray lubricants, simply wipe clean after use.
-
Page 11: Maintenance
HOW TO CARE FOR YOUR CHILDCARE HIGH CHAIR Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference. - Page 12 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 82 Maribyrnong Street, Footscray, VIC, 3011 Distribution Customer Service 1300 667 137 2-6 Argyle St, Morningside, PO Box 41-014, W: www.cnpbrands.com.au St Lukes, Auckland, New Zealand E: info@cnpbrands.com.au Customer Service: 0800 567 5000 F: www.facebook.com/CNPBrands I: @cnp_baby...