Commissioning - Endress+Hauser Levelflex M FMP40 Description Of Device Functions

Levelflex M
⇒
ENDRESS + HAUSER
– + E
Endress+Hauser
1.6

Commissioning

1.6.1 Switching on the measuring device
When the device is switched on for the first time, the following messages appear on the display:
⇓
⇓
⇓
⇓
⇓
⇓
1 Notes on using this manual
After 5 s, the following message appears
After 5 s, the following message appears
After 5 s or after you have pressed
message appears
Select the language
(this message appears the first time the device is
switched on)
Select the basic unit
(this message appears the first time the device is
switched on)
The current measured values PV (interface layer) and SV
(level) are displayed in the standard settings.
F
After is pressed, you reach the group selection.
This selection enables you to perform the basic setup
F
the following
11