Calling Up Information; Calling Up Messages - Viessmann Vitocal 060-A Operating Instructions For The System User

Calling up information

The following information can be called up:
■ Annual consumption (estimated electricity consump-
tion)
Proportion of DHW heating provided by the immer-
■
sion heater and the heat pump in the last 30 days
Example:
Fig. 18
Display Meaning
"142" "kWh / 30 The appliance has consumed
days" 142 kWh per month.
"HR:22" % Time percentage of DHW heating
provided by the immersion heater in
the last 30 days: 22 %
"HP:78" % Time percentage of DHW heating
provided by the heat pump in the
last 30 days: 78 %

Calling up messages

Messages are shown if your DHW heat pump experi-
ences particular events or operating conditions.
Display information
Press the following buttons:
1. until "INFO" is displayed.
2. OK to confirm
3. +/- to toggle between the displays.
4. and OK simultaneously to reset the values.
5. to exit the menu.
If faults occur, notify your contractor. Tell your contrac-
tor which fault message is being displayed ("ER 0" to
"ER 10"). This enables the contractor to be better pre-
pared and may save you unnecessary travelling costs.
Checks
17