Scanning options
Calling up information
You can call up information about the proportion of
DHW heating provided by the immersion heater and
heat pump in the last 30 days.
Example
Display
"HP:78"
"HE:22"
Display information
1. Use
to select information
2. Use OK to switch between displays.
Note
To reset the values, press
ously.
Calling up messages
Messages are shown if your DHW heat pump experi-
ences particular events or operating conditions.
If faults occur, notify your contractor. Tell your contrac-
tor which fault message is being displayed ("ER 1" to
"ER 8"). This enables the contractor to be better pre-
pared and may save you unnecessary travelling costs.
12
Meaning
The proportion from the heat pump was 78 %.
The proportion from the immersion heater was 22 %.
.
and OK simultane-
3. Return to the last operating program with
.