Table of Contents
Advertisement
INSTALLATION
2.11 SOFTWARE CHECK LIST
Software drivers, related software, and diagnostics are supplied by
Cabletron Systems on floppy diskette(s) shipped with the adapter.
The drivers support a variety of network platforms. For network
software installation instructions, refer to the Network Software
Installation Guide that accompanies the software.
2.11.1 Diagnostics
Diagnostics are included in the Cabletron software diskette under
the directory DIAGS. These diagnostics are menu driven and can
be run from the floppy diskette, or copied onto your hard disk into
the directory containing the Cabletron software.
2.11.2 Software Tips
The following tips may help you avoid software related problems:
• Cabletron supplies different drivers for use with different
operating systems. Make sure that you are using the correct
driver and that the I/O hardware switch setting agrees with
the software I/O setting that you selected.
• If you are using Novell NetWare, Cabletron supplies a direct
IPX and a packet driver IPX. Make sure you are using the
correct IPX.COM file. See the Network Software Installation
Guide included with the Cabletron software for more
information.
• When using the packet driver version 4.0 or above, you must
use IPX (NSHPD) LAN Option 1.05.03 or above.
• If you are using a Kingston Memory Board, DO NOT use
automatic configuration after copying the Cabletron ADF file.
Page 2 - 16
Advertisement
Table of Contents
