Chapter 2 Installation; Adapter Models; Preparing The Adapters - Cabletron Systems T2015 Installation Manual

2.1

ADAPTER MODELS

The T2015 and T3015 Series network adapters are used for the
specific computer bus architectures listed below:
• T2015 Series - IBM Personal Computer AT, IBM Personal
System/2 Model 30, or a compatible with an AT style bus.
• T3015 Series - IBM Personal System/2 or compatibles with a
Micro Channel
2.2

PREPARING THE ADAPTERS

This chapter shows you how to prepare a Cabletron Systems
Token-Ring network adapter and install it in your computer. The
clock configuration for both the T2015 and T3015 is set through a
jumper. The I/O address for the T2015 is set through a dual DIP
switch, and the I/O address of the T3015 is set by configuring the
Adapter Description File for your microchannel-compatible
computer. All other parameters for both adapters are set through
software. The preparation and installation procedure for any of the
adapters consists of:
• Unpacking the adapter and software, and making a backup
copy of the software.
• Configuring and installing the adapter, and running
diagnostics if necessary.
• Making network connections, and installing network drivers
for your operating system.
CHAPTER 2
INSTALLATION
®
style bus.
INSTALLATION
Page 2 - 1