Cabletron Systems T2015 Installation Manual page 25

• Slide the adapter into the guide slots and firmly press, but do
not force, the adapter into the expansion slot. The plastic clips
on the adapter (1, 5, Figure 2-14) will snap into place as the
adapter is inserted into the expansion slot.
• Reinsert the thumbscrew, and replace the PC cover. Reattach
the power and peripheral cables, and power up the PC.
2.8 COPYING THE ADF FILE
After a T3015 adapter is installed in your computer and before
using it, you must copy the Cabletron Adapter Description File
(ADF) onto a backup copy of your system's Reference Diskette.
The ADF is supplied with your Cabletron software. The ADF
provides Programmable Option Select Parameters for the System
Configuration Utility. If necessary, you can change the parameters
during this procedure.
IMPORTANT: Be sure to use a backup copy of the Reference diskette,
and not the original Reference Diskette, when you perform the following
procedure.
2.8.1 Configuring the ADF file
To configure the ADF:
• Copy the two ADF Files (@ 5608.adf and @ 5609.adf) from the
Cabletron diskette to your system's Reference Diskette.
• Boot from your system's Reference Diskette.
• Answer Yes to: Automatically configure the system?
INSTALLATION
Page 2 - 13