Pinout For The T1 Interface Connector; T1 Cable Assembly - Cabletron Systems SWPIM-T1 Installation Manual

Appendix A: Specifications
A.2.1

Pinout for the T1 Interface Connector

The network interface pin assignments for the network connector are
shown in Table A-1.
Table A-1 Pinouts for the T1 Interface Connection
A.3

T1 CABLE ASSEMBLY

Table A-2 lists Cabletron Systems part numbers for the interface cables
for the SWPIM-T1. A standard 20-foot cable is available or the customer
may specify the length of cable when ordering.
Interface Cable
T1 Line Interface Cable
T1 Line Interface Cable
1. Standard 20-foot T1 Line Interface Cable.
2. (L denotes length required in feet or meters). For example: 9372094-3
denotes a 3-foot cable; 9372094-3M denotes a 3-meter cable.
A-2
Pin
1
2
3
4
5
6
7
8
Table A-2 SWPIM-T1 Cable Part Numbers
Signal
Receive Ring
Receive Tip
Shield Ground
Transmit Ring
Transmit Tip
Shield Ground
Shield Ground
Shield Ground
Cabletron Part Number
9372094-20
9372094-L
SWPIM-T1 Installation Guide
1
2