Fitting The Cover Strips - Viessmann Vitocell 140-E Installation And Service Instructions For Contractors

Installation sequence
Vitocell with fitted Solar-Divicon

Fitting the cover strips

3.
2.
Fig.23
Type plate
A
1. Tighten the nuts on the bolts.
2. Fit the front section of the Vitotrans thermal insula-
tion.
3. Trim and fit the cover strip.
26
(cont.)
1.
4. Fit the rear strip to the cylinder.
5. Affix the type plate.
6. Tap the thermal insulation towards the front. This
5.
4.
A
6.
reduces the gap to the fitted modules.