Parts List.............................................................................................................................................4
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference. B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.
Page 3
Niniejszy produkt musi być zamontowany na odpowiedniej powierzchni, a podczas użytkowania nie wolno przekraczać podanego maksymalnego obciążenia. A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta.
BT33 PARTS LIST Suitable for loads up to 5Kg (11lbs)
Page 5
WALL FIXING KIT (FOR FIXING MOUNT TO WALL) PART NAME TOP BALL CLAMP WALL PLATE BOTTOM BALL CLAMP BALL INTERFACE ADAPTOR INTERFACE M6 x 12mm SCREW (FOR PART 5) M6 x 45mm HEX SCREW M6 METAL WASHER (FOR PART 7) M3 x 8mm SCREW SPEAKER INTERFACE KIT (FOR ATTACHING MOUNT TO...
THIS MOUNT MUST BE DISASSEMBLED PRIOR TO INSTALLATION INSTALLATION INSTRUCTIONS Choose one of the four fixing methods shown that suits your speaker fixings. Attach part 4 to the speaker using screws A, B, C or D, or for keyhole fixings use screw A and part E. i.
Page 8
Attach parts 1 & 3 to part 4 using parts 7, 8 & 10. SPEAKER ASSEMBLED VIEW...
Page 9
Fix part 2 to the wall using one of the two methods shown. i. Brick / concrete walls. 6mm (1/4") masonry bit ii. Wood / wood stud walls. 3mm (1/8") wood bit STUD FINDER (Optional)
Page 10
Secure the mount to part 2 Hook the mount onto part 2. using part 9. SPEAKER WALL WALL To adjust the tilt and swivel l oosen part 10 or part 7 then adjust the speaker position, to secure retighten part 10 or part 7. SPEAKER Tilt &...
1.6" 79mm 51mm 3.1" 2.0" 67mm 2.6" WALL PLATE .3" 15mm 0.6" 88mm 3.5" .2" 34mm 1.3" THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.