Basic Settings; Changing The Basic Settings; List Of Basic Settings - Bosch CM583MS0K Instruction Manual

QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.

Changing the basic settings

The appliance must be switched off.
Touch the 0 button for a few seconds.
1.
The first basic setting will appear on the display.
Use the rotary selector to change the basic setting.
2.
Touch the 0 button.
3.
The next basic setting will appear on the display.You
can go through all of the basic settings using the
0 button and make changes using the rotary
selector.
Touch the 0 button for a few seconds.
4.
This applies all the settings.
If the appliance is in standby mode, you can change the
settings at any time.
Cancelling
If you do not want to save the changes, turn the function
selector. The basic settings are ended without being
saved.

List of basic settings

Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
Audible signal
™‹‚
duration
ƒ = medium = 30
seconds
Audible signal but-
™‹ƒ
ton
‚ = On
Display brightness
™‹„
ƒ = medium
Time display
™‹...
‚ = On
Interior lighting
™‹†
‚ = On
Factory setting
™‹‡
‹ = Off
Demo mode
™‹ˆ
‹ = Off
Audible signal vol-
™‹‰
ume
ƒ = medium

Basic settings

Options Explanation
‚ = short = 10 Audible signal
seconds sounds after a set
„ = long = 2 min- cooking time or
utes duration elapses or
when the timer
reaches zero
‹ = Off Audible signal when
button is pressed
‚ = low Allows you to set the
„ = high display brightness
‹ = Off Allows you to display
the clock time
‹= Off Allows you to switch
the interior lighting
on or off
‚ = On Appliance reset to
factory settings
‚ = On Allows you to switch
demo mode on and
off
Note: Demo mode
is only visible in the
first 5 minutes after
connecting the appli-
ance to the mains.
‚ = low Setting the audible
signal volume
ƒ = high
en
21