Table of Contents
Advertisement
If the grill operating mode is set, the cooking time is
displayed when you press
the timer. The timer duration is highlighted for a short
time. You can change the timer duration.
13 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
13.1 Changing basic settings
Requirement: The appliance is switched off.
Press and hold for approx. 3 seconds.
1.
a The display shows information about the process.
Use
to confirm this information.
2.
a The first setting "Language" appears on the display.
Turn the control ring to change the setting as re-
3.
quired.
Press
.
4.
a The next setting appears on the display and you can
use the control ring to change it.
Use
to work through all of the information and, if
5.
required, use the control ring to make changes.
To save changes, press and hold for approx. 3
6.
seconds.
a The display shows a notification confirming that the
settings have been saved.
Note: Your changes to the basic settings will be re-
tained even after a power failure.
13.2 Discarding changes to the basic
settings
Press
.
▶
a All changes are discarded and not saved.
13.3 Overview of the basic settings
This is where you can find an overview of the basic set-
tings and factory settings. The basic settings depend
on the features of your appliance.
Notes
¡ Changes to the language, button tone and display
brightness settings take effect immediately. All other
settings do not take effect until you save them.
¡ Your changes to the basic settings will be retained
even after a power failure. Only the settings pertain-
ing to the initial start-up of the appliance need to be
implemented once again following a power failure.
→ "Initial use", Page 9
. You can use
to select
12.3 Cancelling the timer
Reset the timer duration.
▶
a Once this is implemented, the symbol no longer
lights up.
Basic settings Selection
Language
Set "Language"
Time
Set "Time "
Audible signal
Short cooking time
Medium cooking time
Long cooking time
Button tone
Switched off
Switched on
Display bright-
The display brightness can be adjus-
ness
ted in 5 settings
Setting 3
Clock display
Switched on
Switched off
Night-time dim-
Switched off
ming
Switched on (display dimmed
between 10 p.m. and 6 a.m.)
Demo mode
Switched off
Switched on (this is only displayed in
the first 3 minutes following a reset
or the initial start-up)
Factory set-
Reset
tings
Do not reset
1
Factory setting (may vary according to model)
Note: Changes to the language, button tone and dis-
play brightness settings take effect immediately. All
other settings do not take effect until you save them.
13.4 Changing the time
Requirement: The appliance is switched off.
Press and hold for approx. 3 seconds.
1.
a The display shows information about the process.
Use
to confirm this information.
2.
a The first setting "Language" appears on the display.
Press
.
3.
a The setting for the clock time appears.
Use the control ring to change the time.
4.
To save changes, press and hold for approx. 3
5.
seconds.
a The display shows a notification confirming that the
settings have been saved.
Basic settings en
1
1
1
1
1
1
1
15
Advertisement
Table of Contents
