Cleaning The Cooking Compartment And Accessories; Operating The Appliance; Switching The Appliance On And Off; Selecting An Operating Mode - Bosch CM583MS0K Instruction Manual

Operating the appliance

en
Notes
If you do not touch the 0 button after setting the
■
time, the set value is automatically adopted after a
few seconds.
If the function selector has been moved to configure
■
the settings, it must be returned to the "Off" position
once you have finished. Only then can the appliance
be used.
In order to reduce the energy consumption of your
■
appliance in standby, you can hide the clock.
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed. One hour with Hot air < at 180 °C
is ideal for this. Ensure that no packaging remnants
have been left in the cooking compartment.
Use the function selector to set Hot air <.
1.
Use the rotary selector to set to 180 ºC.
2.
Touch start l stop.
3.
The appliance begins to heat up.
Switch off the appliance after one hour. To do so, touch
start l stop and then turn the function selector to the off
position.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
12
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.

Switching the appliance on and off

Before you are able to set the appliance, you must
switch it on.
The childproof lock can only be set if the
Note:
appliance is switched off. Some displays also remain
visible in the display when the appliance has been
switched off.
Switch off your appliance when it is not being used. If
no settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Turn the function selector to switch on the appliance.
A standard value is highlighted in the display. The
appliance is ready to use.
You can find out how to select the operating modes in
the individual chapters.
Switching off the appliance
Turn the function selector to the off position.
Any functions that may be running are cancelled.
The time appears in the display.
You can set whether the clock should be
Note:
displayed when the device is switched off in the basic
settings.

Selecting an operating mode

After selecting an operating mode, default values are
shown in the display. You can start this setting
immediately.
The following always applies:
Use the function selector to select the operating
1.
mode.
If necessary, apply other settings.
2.
To do this, touch the appropriate field and use the
rotary selector to change the value.
Touch start l stop.
3.
The appliance starts the operation. The
start l stop LED lights up.