Cabletron Systems EMM-E6 Addendum Manual page 2

Channel Assignment for Individual TPXMIM Ports
At the MIB navigator prompt: MIBNav-
1. Enter the following command (refer to Note on page 1):
For EMME:
set /1/3/6/1/4/1/52/1/6/1/2/3/1/1/3/ MMAC Slot # [TPXMIM Port #] Integer
For EMM-E6:
set /1/3/6/1/4/1/52/4/1/2/4/1/2/1/1/3/ MMAC Slot # [TPXMIM Port #] Integer
The following table provides the channel-to-integer association:
Example: In an MMAC with an EMME, a TPXMIM in slot 5 could be sent the following command to direct all
TPXMIM port 4 traffic to Channel B ( 2 ):
set /1/3/6/1/4/1/52/1/6/1/2/3/1/1/3/ 5 [ 4 ] 2
2. Press the return key. If the device accepts the integer entry, no error messages display.
If the module does not accept the entry, and an error message displays, start with step 1 again and enter the
information. If the module still refuses to accept the entry, contact Cabletron Systems Technical Support.
Getting Help
If you have questions, or need additional help, refer to the following and contact Cabletron Systems Technical Support:
Phone
CompuServe
Internet mail
FTP
BBS
For additional information about Cabletron Systems products, visit our
World Wide Web site: http://www.cabletron.com/
© Copyright April 1997 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005
All Rights Reserved
Printed in the United States of America
Order Number: 9031355-01 April 1997
EMME , EMM-E6 , MMAC , and TPXMIM are trademarks of Cabletron Systems, Inc.
CompuServe is a registered trademark of CompuServe.
The information in this document is proprietary and is not to be copied in any form, or by any means, without the
written consent of Cabletron Systems.
PN 9031355-01
>
MMAC
Channel
A
B
C
(603) 332-9400
Monday – Friday; 8
GO CTRON from any ! prompt
support@ctron.com
ctron.com (134.141.197.25)
Login anonymous
Password your email address
(603) 335-3358
Modem setting 8N1: 8 data bits, No parity, 1 stop bit
OID Integer
(Instance)
1
2
3
. . – 8 . . Eastern Time
A M P M
Page 2