Cabletron Systems E2210 Installation Manual page 32

SECONDARY MEDIA
Push the tee connector in until you engage the pins and rotate the
tee connector clockwise until it locks.
Next, attach the thin-net segment (see Figure 3-1) to one of the
male connections on the BNC tee-connector. Rotate and lock the
collar on the Thin-Net segment, as above.
Each segment attached to the tee-connector must be terminated (at
an end point). If a segment is not attached to (the other) of the male
connections on the tee-connector, then a terminator (see
Figure 3-1,View A) must be placed on that connection.
Attach another thin-net segment (see View B) or a terminator
(View A) to the other male connection on the tee-connector.
VIEW A
BNC Terminator
Thin-Net
Segment
Figure 3-1. Connecting to a Thin-Net Segment
Page 3 - 2
Adapter BNC Port
VIEW B
Thin-Net
Segment
BNC-Tee Connector