Connecting Primary Media; Rj45 Interface - Cabletron Systems E2210 Installation Manual

INSTALLATION
Adapter
Expansion
Slots
Figure 2-4. Installing the E2200 Series Adapter
2.4

Connecting Primary Media

2.4.1 RJ45 Interface

Connect the primary media port to a twisted pair segment by
inserting the RJ45 connector into the adapter's RJ45 port as shown
in Figure 2-5. Check that the Link LED is lit. If you know that the
adapter has attempted to transmit data (transmit LED flashed) and
the link LED is not lit, check the items listed below:
• Verify that the PC is powered up.
• Check that the 10BASE-T device at the other end of the twisted
pair segment is powered up.
• Verify that the RJ45 connector on the twisted pair segment has
the proper pinouts (see Appendix A, Technical Specifications).
Page 2 - 6
Screw
Bracket
Backplates