V-fit MCCT-2 Manual page 21

8
Release the 2 x M5 x 12mm Screws (75) from the back of the Exercise Monitor (76).
Connect the Monitor Link Wire (69) and Pulse Sensor Wire (80) to the Exercise Monitor (76), then
fit the Exercise Monitor (76) onto the Exercise Monitor Bracket and secure using 2 x M5 x 12mm
Screws (75) that were released.
SENSOR
PULSE
80
74
Note
FULLY TIGHTEN all Bolts, Nuts and
Fittings now, ensuring that your
product in located on a clear flat
surface before doing so. Your
product will now be ready to use.
Assembly
80
69
75 70
69
76
Page 21