V-fit MCCT-2 Manual page 18

3
Attach both Footplates (24 L/R) to the Footplate Support Bars (25 L/R) using 2 x M8 x50mm
Hex Bolts (23), 2 x M8 Flat Washers (26) and 2 x Knob M8 (93) for each footplate.
Note : The Footplates can be adjusted in three positions.
4
Release the 3 x M8 Nylon Nuts (27) and 3 x M8 Flat Washers
(26) from underneath of the Saddle (90), then attach the Saddle
(90) to the Saddle Support (88) using the 3 x M8 Nylon Nuts
(27) and 3 x M8 Flat Washers (26) that were released. Fit the
Saddle Stem Support (88) to the Saddle Post (87) and secure
using 1 x M8 Flat Washer (26) and 1 x M8 Locking Knob (89).
Page 18
Assembly
15L
23
25L
26
93
26
93
15R
23
26
26
93
93
24L
26
27
26
27
87
24R
25R
90
88
26
27
26
89