Table of Contents
Advertisement
Downline Load Does Not Start
Messages: The following sequence of messages appears on the console terminal
at various time intervals:
Local—951—Network access server will retry operation in n seconds
Local—953—[IP] Attempting to locate load host, [ETHERNET]
Local—953—[MOP] Attempting to locate load host, [ISO8802]
Local—953—[MOP] Attempting to locate load host, [ETHERNET]
Problem: Load hosts are not responding to the Access Server 316 downline load
request within the allotted timeout period.
Correction: Copy the error message exactly as it appears on the console terminal
display and notify the network manager. For more information, refer to the
Network Access Software Problem Solving guide.
Seven-Segment Display Codes
The following list shows the codes (in approximate font type) and describes the
codes that will be displayed during the server internal self-test when the Access
Server 316 goes through a power up and initialization.
Off — No power or display is broken
B
— Initial power on
F
— Initialization
E
— Access Server 316 internal test
d
— SIM 1 test
C — SIM 2 test
b
— Access Server 316 internal test
A
— Access Server 316 internal test
9
— Access Server 316 internal test
7
— Access Server 316 internal test
5
— NI external test
=
— Firmware loading from Flash RAM, or software re-programming Flash
RAM
What to Do If You Have Problems
7-7
Advertisement
Table of Contents
