Cabletron Systems Access Server 316 Hardware Owner's Manual page 16

Hardware Overview
Table 1-3 describes the LEDs.
Ethernet
Selected
10BaseT
Standard
Table 1-4 describes the connectors. For additional information on the connectors,
refer to Chapter 4.
Connector
Serial port connectors
Standard Ethernet
connector
10BaseT Ethernet
connector
Power cord receptacle
1-4
Table 1-3. Network Activity LED
Connection Status
Open/incorrectly terminated
Correctly terminated/no network activity
Correctly terminated/network activity
Open on network activity
Correctly connected/no network activity
Correctly connected/network activity
Table 1-4. Access Server 316 Connectors
Description
These 16 female MJ8 connectors connect asynchronous serial
devices to the Access Server 316.
This single 15-pin female D-connector connects to a standard
Ethernet/IEEE 802.3 local area network using a transceiver
cable.
This single female MJ8 connector connects to a 10BaseT
Ethernet/IEEE 802.3 local area network.
The Access Server 316 power cord plugs into this receptacle.
LED Display
OFF
ON
Flashing (rate independent of
network activity).
OFF
OFF
Flashing or ON, depending
on network activity.