Cabletron Systems Access Server 316 Hardware Owner's Manual page 15

Figure 1-2. Access Server 316 Front View
Table 1-1 describes the Access Server 316 controls.
Control
System reset switch
Ethernet select switch
Table 1-2 describes the indicators.
Indicator
System OK LED
Network Activity
LED
Seven-Segment
Display
Table 1-1. Access Server 316 Controls
Description
On power up, press this switch until E appears on the
Seven-segment display. This reloads the factory set
parameters. During Flash load (three horizontal segments of
the Seven-segment LED), pressing and holding the system
reset switch will abort the Flash RAM load and force a
network boot. See Chapter 7 for more information.
This switch selects either standard or 10BaseT Ethernet.
Table 1-2. Access Server 316 Indicators
Display
Lights (green) when the Access Server 316 has passed
self-test. Blinks when a nonfatal error occurs on self-test.
When off, indicates that the Access Server 316 has failed
self-test.
Refer to Table 1-3.
Provides error and status information.
Hardware Overview
1-3