How To Connect A Microphone To The Camera - Axis M5525-E User Manual

AXIS M5525-E PTZ Network Camera

How to connect a microphone to the camera

How to connect a microphone to the camera
This example explains how to connect a microphone to the camera using an audio extension cable.
Required hardware
• AXIS T8351 Microphone 3.5 mm
• AXIS Audio Extension Cable A, 5 m (16 ft)
Note
• To avoid noise, don't run the cable close to or in parallel with other cables.
• To avoid noise, cut the cable as short as possible.
• To maintain IP66 rating, make sure you keep the jack inside the housing.
Connect the cables
1. Keep the 3.5 mm jack and cut the audio extension cable.
2. Strip the outer cable insulation.
3. Strip the inner wire insulation.
4. Twist the audio wires (with insulation) together.
5. Twist the grounding wires (without insulation) together.
6. Connect the audio wires to the AUDIO IN pin on the camera. See Product overview on page 3 .
7. Connect the grounding wires to the GND AUDIO IN pin on the camera.
8. Connect the microphone to the jack of the audio extension cable.
9. Turn on audio and adjust other audio settings in the camera's webpage.
4