Set Up The Product; Connect The Camera To A Monitor; Basic Setup - Axis M3045-WV User Manual

Table of Contents

AXIS M3045-WV Network Camera

Set Up the Product

The Axis product can be configured by users with administrator or operator rights. To open the product's Setup pages, click Setup in

the top right-hand corner of the Live View page.

•

Administrators have unrestricted access to all settings.

•

Operators have restricted access to settings, see Users on page 46

When the camera is first connected to a monitor and then powered up, the default capture mode is automatically set for viewing the

image stream over HDMI. If the camera is connected to a monitor after power up, restart the camera or set the capture mode to

1080p (HDMI)@30/25 fps. This can be done from the Capture mode drop-down list from Video > Camera Settings. This can also be

done from the Configure capture mode window (see ) after a factory default (see page 61).

Note

It is recommended to use only HDMI certified monitors and cables. For more information see www.hdmi.org

Basic Setup provides shortcuts to the settings that should be made before using the Axis product:

1. Users. See page 46.

2. Wireless. See page 52.

3. TCP/IP. See page 49.

4. Date & Time. See page 48.

5. Video Stream. See page 18.

The Basic Setup menu can be disabled from System Options > Security > Users.

Table of Contents