Toshiba RUAGP Series Original Owner's Manual page 42

Setting modification buttons (UP, DOWN), confirmation button (ENTER), return button (BACK)
The operation buttons (UP, DOWN, and ENTER) and LED display on the operation panel (unit
controller with pressure display function) can be used for operations such as setting the
temperature setpoint, monitoring the operation state, and displaying the error log for the
corresponding module.
When title appears
UP ·········· Go to the next display title.
DOWN ····· Go to the previous display title.
ENTER ···· Go to the detailed item.
When detailed item appears
UP ·········· Go to the next detailed item.
DOWN ····· Go to the previous detailed item.
BACK ······ Go to the display title.
When changing the setting value of a detailed item
UP ·········· Increase the setting value.
DOWN ····· Decrease the setting value.
ENTER ···· Confirm the setting value.
BACK ······ Go to the display title.
 Display mode
The unit controller with pressure display function displays the operating pressure of each circuit.
The display mode can be set to one of Bar Graph Display, Numerical Display 1, and Numerical
Display 2.
(1) Bar graph display (standard settings)
Pressure data (Note 1)
Display the current high
and low pressures of each
circuit.
(2) Numerical display 1
Operating range (Note 2)
Display the operating
range of the unit.
Pressure data
Display the current high
and low pressures of each
circuit.
- 40 -
Operating range (Note 2)
Display the operating
range of the unit.