Table of Contents
Advertisement
01. MC operation pattern setting screen
02. Customer reference number
• Select "01. MC operation pattern setting" from
screen on the left appears.
• You can change the item with
• Select pattern 1 and press
left (01_1. MC pattern1 screen). (The same applies to other
patterns.)
• You can switch the system with
• You can change the item with
• The mode changes each time you press
(Cool → Heat → CA→ HA→ Stop)
* " CA " and " HA " storage are stom options.
• For the set temperature, demand 1, demand 2, and demand 3,
press
to display the input screen. Refer to the "Value
input" screen for detailed information about entering a value.
• The standards that can be set during demand control are
"Current (A)", "Operation Capacity (%)", "Rated power ratio
(%)", "Power consumption ratio (%)", and "Power (kW)".
The demand input title follows the set standard.
Refer to the table below for the items and content of display
information.
Item
Setting
Mode
Cooling, Heating, Cool storage, Warm storage, Stop
Cooling: 4. 0 to 30. 0
PST
Heating: 25. 0 to 55. 0
Demand 1
0 to 5000
Demand 2
0 to 5000
Demand 3
0 to 5000
Flw ctrl
step, byps0
Setting
1, 2
* "Flw ctrl" control and "Setting" are display only.
• Select "02. Customor reference number" from
screen on the left appears.
- 31 -
. The
and
.
to move to the screen on the
and
.
and
.
.
. The
Hide quick links:
Advertisement
Table of Contents
