Pioneer AVIC-Z810DAB Operation Manual page 63

Menu Item Description
[Ground] The polarity of the connected lead is negative.
NOTE
If the camera polarity setting is wrong, or wrong camera setting is
made, press and hold
and then change the camera polarity setting to [Battery].
[Parking Assist Guide] You can set whether to display the parking assist
[On] [Off] guidelines on the rear view camera images when backing
up your vehicle.
[Parking Assist Guide Adjusting the guidelines by dragging or touching
Adjust]*
/ /
Touch [Default] to reset the settings.
CAUTION
• When adjusting the guidelines, be sure to park the vehicle in a
safe place and apply the handbrake.
• Before getting out of the car to place the markings, be sure to
turn the ignition switch off (ACC OFF).
• The range projected by the rear view camera is limited. Also, the
vehicle width and distance guidelines displayed on the rear view
camera image may differ from the actual vehicle width and
distance. (The guidelines are straight lines.)
• The image quality may deteriorate depending on the usage
environment, such as at night or in dark surroundings.
NOTE
Using packing tape or similar tape place markings as shown below
before setting up the guidelines so that the guidelines can be
overlaid to the markings.
2 m
Markings
Markings
* This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
to release the rear view camera screen
/ on the screen.
50 cm
25 cm
25 cm
Rear bumper
[Wi-Fi Settings]
Menu Item
[Wi-Fi Settings]
[Safe Mode]
Menu Item
[Safe Mode]
/ /
[On] [Off]
[Demo Mode]
Menu Item
[Demo Mode]
[On] [Off]
[System Language]
Menu Item
[System Language]
[Climate Reverse]
Z910DAB Z810DAB Z710DAB Z7110DAB
Menu Item
[Climate Reverse]
[On] [Off]
[Restore Settings]
Touch [Restore] to restore the settings to the default settings.
Description
(page 36)
Description
Set the safe mode that regulate operating some functions
only when you stop your vehicle in a safe place and apply
the handbrake.
Description
Setting the demo mode.
Description
Select the system language.
NOTES
• If the embedded language and the selected language setting are
not the same, the text information may not display properly.
• Some characters may not be displayed properly.
Description
When the optional vehicle bus adapter is connected, the
left/right display of the climate control status screen can be
reversed if the display does not match that of the vehicle.
63
En