Starting Procedure - Pioneer AVIC-Z810DAB Operation Manual

1
Press .
2
Touch to open the LCD panel.
3
Remove the disc and press
Z710DAB Z610BT Z7110DAB Z6110BT
1
Press .
Inserting an SD memory card
Z910DAB Z810DAB
1
Press .
2
Touch to open the LCD panel.
3
Insert an SD memory card into the SD card slot.
4
Press .
NOTES
• This system is not compatible with the Multi Media Card (MMC).
• Compatibility with all SD memory cards is not guaranteed.
• This product may not achieve optimum performance with some SD memory cards.
Ejecting an SD memory card
Z910DAB Z810DAB
1
Press .
2
Touch to open the LCD panel.
3
Press the middle of the SD memory card gently until it clicks.
4
Pull the SD memory card out straight.
5
Press .
Plugging a USB storage device
1
Pull out the plug from the USB port of the USB cable.
2
Plug a USB storage device into the USB cable.
NOTES
• This product may not achieve optimum performance with some USB storage devices.
46
En
.
• Connection via a USB hub is not possible.
• A USB cable is required for connection.
USB cable
USB storage device
Unplugging a USB storage device
1
Pull out the USB storage device from the USB cable.
NOTES
• Check that no data is being accessed before pulling out the USB storage device.
• Turn off (ACC OFF) the ignition switch before unplugging the USB storage device.

Starting procedure

For Disc
1
Insert the disc (page 45).
TIP
If the disc is already set, select [Disc] as the playing source.
For USB/SD
1
Insert the SD memory card into the SD card slot or plug the USB storage device
into the USB connector.
2
Press then touch .
3
Touch [USB] or [SD].
Playback is performed in order of folder numbers. Folders are skipped if they contain
no playable files.