Pioneer AVIC-Z810DAB Operation Manual page 64

Navigation av system
Hide thumbs Also See for AVIC-Z810DAB:
Table of Contents

Advertisement

CAUTION
Do not turn off the engine while restoring the settings.
NOTE
This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
Menu Item
Description
[All Settings]
Almost all settings or recorded content returns to the
default.
[Audio Settings]
Restore to default Audio settings.
NOTE
This setting is available when the source is turned off.
[Theme Settings]
Restore to default Theme settings.
[Bluetooth Settings]
Restore to default Bluetooth settings.
[Keyboard]
Menu Item
Description
[Keyboard]
You can use the keyboard in AppRadio Mode + by setting
the language of the keyboard for iPhone.
NOTES
• Set the same system language setting as the iPhone to operate
this function properly.
• This function is only available in AppRadio Mode + on the
iPhone.
[Beep Tone]
Menu Item
Description
[Beep Tone]
Select [Off] to disable the beep sound when the button is
[On] [Off]
pressed or the screen is touched.
[Touch Panel Calibration]
Z810DAB
Z710DAB
Z610BT
Z7110DAB
If you feel that the touch panel keys on the screen deviate from the actual positions that
respond to your touch, adjust the response positions of the touch panel screen.
NOTES
• Do not use sharp pointed tools such as ballpoint or mechanical pens. They may damage the screen.
• Do not turn off the engine while saving the adjusted position data.
• This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
64
En
Z6110BT
Menu Item
Description
[Touch Panel Calibration]
1
Touch two corners of the screen along the arrows then
touch the centres of the two [+] marks at the same
time twice.
2
Press
The adjustment results are saved.
3
Press
Proceed to 16-point adjustment.
4
Gently touch the centre of the [+] mark displayed on
the screen.
The target indicates the order.
• When you press
position returns.
• When you press and hold
cancelled.
5
Press and hold
The adjustment results are saved.
[Dimmer Settings]
NOTE
This setting is available only when you stop your vehicle in a safe place and apply the handbrake.
Menu Item
Description
[Dimmer Trigger]
Setting the dimmer brightness.
[Auto]
Switches the dimmer to on or off automatically according
to your vehicle's headlight turning on or off.
[Manual]
Switches the dimmer to on or off manually.
[Time]
Switches the dimmer to on or off at the time you adjusted.
[Day/Night]
Setting the dimmer duration by day or night.
You can use this function when [Dimmer Trigger] is set to
[Manual].
[Day]
Turns the dimmer function to off.
[Night]
Turns the dimmer function to on.
.
once again.
, the previous adjustment
, the adjustment is
.

Advertisement

Table of Contents
loading

Table of Contents