Getting Ready - Sandstrom S20BIG13E Instruction Manual

Getting Ready

This microwave is designed for home use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box.
GB Make sure there are no dents, and the door closes properly. A damaged microwave
could allow microwave energy to escape. Make sure that you have taken out all the
packaging from inside the microwave. Please dispose of the plastic wrappings / bags
safely and keep out of the reach of babies and young children.
2. Choose a flat work surface for your
microwave away from heat sources such
as radiators or fires and away from cold
areas. The surface should be at least
85cm above the floor. This microwave
is designed to be installed in a cabinet
at least 60cm wide, and at least 55cm
deep. Do not cover any opening or
vents.
3. Plug your microwave into a standard
household electrical socket (230V~,
13 amp rated). Avoid using a socket
that also has an adaptor and other
equipment plugged in. Do not use a
multi-adaptor.
4. Put the turntable support inside
the microwave and place the glass
turntable plate on top of the support.
The turntable support is shaped
to sit securely on the spindle. You
must always use the turntable plate
and support whenever you use the
microwave.
5. To protect your work surface, we
recommend that you fix some non-slip
cushion buttons (not included) to the
underside of the microwave.
Remove the turntable plate and turntable support
before turning the microwave upside down.
50
xcm
xcm
xcm
Underside View