Table of Contents
Advertisement
Getting Ready
This microwave is designed for home use only. It should not be used for commercial catering.
1.
After unpacking your microwave, check that it has not been damaged whilst in the box. Make sure
there are no dents on the microwave, and the door closes properly. A dented or damaged microwave
could allow microwave energy to escape. Make sure that you have taken all the packaging from inside
the microwave. Please dispose of the plastic wrappings or bags safely and keep out of the reach of
babies and young children.
2.
Choose a flat work surface for your microwave
away from heat sources such as radiators or
fires and away from cold areas. You should
allow a 10cm space all around the microwave
and 30cm above so that warm air can
escape from the vents during cooking – This
microwave is not designed to be built in.
3.
Plug your microwave into a standard
household electrical socket. Avoid using a
socket that also has an adaptor and other
equipment plugged in. Do not use a multi-
adaptor.
4.
Put the turntable support inside the
microwave and place the glass turntable plate
on top of the support. The turntable support
is shaped to sit securely on the spindle. You
must always use the turntable plate and
support whenever you use the microwave.
5.
To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
Remove the turntable plate and turntable
support before turning the microwave
upside down.
30cm
10cm
Underside View
10cm
Power Level
Clock
Multi Stage
Weight Adjust
Cooking
Speed Defrost
Auto Defrost
Start/
Quick Start
Stop/Cancel
5
Advertisement
Table of Contents
