Getting Ready - Sandstrom S20MB10E Instruction Manual

Microwave / combination oven
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5

Getting Ready

This microwave is designed for home use. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make sure
there are no dents on the oven, and the door closes properly. A dented or damaged oven could
allow microwave energy to escape. Make sure that you have taken all the packaging from inside the
microwave. Please dispose of the plastic wrappings or bags safely and keep out of the reach of babies
and young children.
2. Choose a flat work surface for your microwave
away from heat sources such as radiators or
fires and away from cold areas. You should
allow a 10cm space all around the oven and
30cm above so that warm air can escape from
the vents during cooking – This microwave is
not designed to be built in.
GB
3. Plug your microwave into a standard
household electrical socket (230-240 volt, 13
amp rated). Avoid using a socket that also has
an adaptor and other equipment plugged in.
Do not use a multi-adaptor.
4. Put the turntable ring inside the microwave
and place the glass turntable on top of the
ring. The turntable is shaped to sit securely on
the spindle. You must always use the turntable
and ring whenever you use the microwave.
5. To protect your work surface, we recommend
that you fix some non-slip cushion pads (not
included) to the underside of the microwave.
8
30cm
10cm
Underside View
10cm

Advertisement

Table of Contents
loading

Table of Contents