Controls; Unit Controller - Trane SCWM Installation, Operation And Maintenance Manual

Controls

Unit Controller

The MSC uses the UC600 control platform for
monitoring and control. XM expansion modules are
used to expand the UC600's I/O capabilities.
In the control panel, the following modules are used:
• UC600
• TD-7 touch screen display and user interface
• XM70.1
• XM32.2
• XM32.3
• XM32.12
• XM32.4 (70-80 ton units only)
• XM30.5 (70-80 ton units only)
• XM30.6 (70-80 ton units only)
• XM32.13-GBAS option
• XM30.14-GBAS option
• XM30.15-GBAS option
54
N N o o t t e e : : The number after the dot in the name (example:
XM30.#) is the IMC bus address, which is set
using the rotary switches on the module.
Remotely mounted in the compressor cassettes, the
following modules are used:
• XM30.7-Entering/Leaving Condenser water
temperature sensors, condenser water strainer in/
out water pressure sensors
• XM30.8-Compressor A: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.9-Compressor B: discharge/suction pressure
sensors, suction temperature, and WRV position
control
• XM30.10-Compressor C: discharge/suction
pressure sensors, suction temperature, and WRV
position control
• XM30.11-Compressor D: discharge/suction
pressure sensors, suction temperature, and WRV
position control
PKG-SVX027C-EN