Electrolux EHF6343FOK User Manual page 21

4.4 Activation and deactivation
of the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field / . The indicator comes on.
For more outer rings touch the same sen-
sor field again. The subsequent indicator
comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.
4.5 Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see
the diagram), and then decreases to the
necessary heat setting.
To start the Automatic Heat Up function
the cooking zone must be cold (no
the display). Touch
zone again and again until the necessary
heat setting comes on. After 3 seconds
comes on in the display.
To stop the function, touch
11
10
9
8
7
6
5
4
3
2
1
0
1 2 3 4
4.6 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Timer after the selection of
the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
in
of the cooking
.
5 6 7 8 9
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate or change the Timer:
touch or of the timer to set the
00 99
time ( - minutes). When the in-
dicator of the cooking zone starts to
flash slow, the time counts down.
• To deactivate the Timer: set the
cooking zone with
deactivate the Timer. The remaining
time counts back to
of the cooking zone goes out.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
When the time comes to an end, the
sound operates and
cooking zone deactivates.
• To stop the sound: touch
Minute Minder
You can use the Timer as a Minute
Minder while the cooking zones do not
operate. Touch . Touch
set the time. When the time comes to an
end, the sound operates and
• To stop the sound: touch
4.7 STOP+GO
The function sets all cooking zones
that operate to the lowest heat setting (
).
When operates, you cannot change
the heat setting.
The function does not stop the timer
function.
• To activate this function touch
The symbol comes on.
• To deactivate this function touch
The heat setting that you set before
comes on.
4.8 Lock
When the cooking zones operate, you
can lock the control panel. It prevents an
accidental change of the heat setting.
Set the heat setting first.
ENGLISH 21
and touch to
00
. The indicator
. The indicator of
00
flashes. The
or to
00
flashes
.
.