Table of Contents
Advertisement
TECHNICAL DATA
Charger voltage
Battery voltage
Rated no load speed
Max torque
Number of clutch position
Chuck capacity
Max. drilling capacity
Steel
Wood
Battery capacity
Weight
NOISE AND VIBRATION DATA
A weighted sound pressure 74 dB (A)
A weighted sound power 85 dB (A)
K
& K
=3.0 dB (A)
PA
WA
Wear ear protection when sound pressure is over 85 dB (A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling into metal
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job. This
may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
6
Vibration emission value a
HELPLINE NO 08707252949
Uncertainty K = 1.5 m/s²
230-240V~50 Hz
18V
550min
15 N.m
16+1
10 mm
8 mm
18 mm
1000mAh
1.7 kg
= 2.19 m/s
2
h
-1
Advertisement
Table of Contents
