Table of Contents
Advertisement
Appendix B: LM Security Screens
B.1.3
Configuration File Upload Using TFTP
To upload a configuration file to a TFTP server, proceed as follows:
1.
Use the arrow keys to highlight the Download Method field.
2.
Use the SPACE bar to select UPLOAD CONFIG.
When Upload Config is selected, the Reboot After Download
NOTE
field is automatically set to NO (and cannot be changed).
3.
Use the arrow keys to highlight the TFTP Gateway IP Addr field.
4.
Set the IP address of the target TFTP server which is to receive a copy
of the SmartSwitch device configurable settings.
5.
Use the arrow keys to highlight the Download Server IP field.
6.
Enter the IP address of the target TFTP server using the DDN format.
For example: nnn.nnn.nnn.nnn
7.
Use the arrow keys to highlight the Download File Name field.
8.
Enter the complete pathway and file name of the configuration file in
the SmartSwitch device.
9.
Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message "UPLOAD CONFIGURATION IN
PROGRESS" displays in the event message line at the top of the
screen and the SmartSwitch device configuration file is uploaded to
the TFTP server.
B-8
PN 9033215
Advertisement
Table of Contents
