Table of Contents
Advertisement
B.1.2
Configuration File Download Using TFTP
To download a configuration file from a TFTP server to the SmartSwitch
device, proceed as follows:
1.
Use the arrow keys to highlight the Download Method field.
2.
Use the SPACE bar to select DOWNLOAD CONFIG.
When DOWNLOAD CONFIG is selected, the Reboot After
NOTE
Download field is automatically set to YES (and cannot be
changed), so that the SmartSwitch device automatically
reboots after a successful download.
3.
Use the arrow keys to highlight the TFTP Gateway IP Addr field.
4.
Set the IP address of the TFTP gateway (this defaults to the same IP
address as that set in the TFTP Gateway IP Addr field on the General
Configuration screen).
5.
Use the arrow keys to highlight the Download Server IP field.
6.
Enter the IP address of the TFTP server using the DDN format.
For example: nnn.nnn.nnn.nnn
7.
Use the arrow keys to highlight the Download File Name field.
8.
Enter the complete pathway and file name of the image stored on the
download server.
9.
Use the arrow keys to highlight EXECUTE at the bottom of the screen
and press ENTER. The message "DOWNLOADING
CONFIGURATION. REBOOT WILL OCCUR WHEN
DOWNLOAD COMPLETES." displays in the event message line at
the top of the screen and the configuration file is downloaded to the
SmartSwitch device from the TFTP server.
PN 9033215
FLASH Download Configuration Screen
B-7
Advertisement
Table of Contents
