Important Safety Notes - C-TEC XFP501E/CA User Manual & Log Book

CAST XFP 16 & 32 ZONE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
Symbols
Read these instructions thoroughly before operation
Hints
Important Notes

IMPORTANT SAFETY NOTES

READ THIS SECTION BEFORE OPERATING THIS PRODUCT.
The fire alarm control panel is safe to operate provided it has been installed in accordance with the
manufacturer's instructions and used in accordance with this user manual.
Hazardous voltages are present inside the panel. DO NOT operate the fire alarm control panel with the
enclosure open. There is no need to open the enclosure except to carry out commissioning, maintenance and
remedial work. This work must only be carried out by competent service personnel who are fully conversant
with the contents of the separate Installation and Programming Manual for this product and have the
necessary skills for maintaining the equipment.
If the panel is damaged in any way, expert advice should be sought regarding its repair.
Regular servicing of the fire alarm system is highly recommended, preferably on a continuous maintenance
contract and by a competent organisation. A full-itemised installation report should be obtained at least
annually.
Disclaimer
Errors and omissions excepted. No responsibility can be accepted by the manufacturer or distributors of this
range of fire panels for any misinterpretation of an instruction or guidance note or for the compliance of
the system as a whole. The manufacturer's policy is one of continuous improvement and we reserve the right
to make changes to product specifications at our discretion and without prior notice.
USER MANUAL & LOG BOOK • Approved Document No. DFU5020000 Rev 3 • Page 3 of 24