Advertisement
Problem
No display light up
No sound or picture,
but the front panel
power light is ON.
No sound or picture
Bad picture/
Blocking Error
AV out No picture
(Video)
The keys are not
working
For further information or any queries
please contact
Technical Support:
www.labgear.co.uk/support
S601b - Troubleshooting
Possible Causes
Power switch is off or battey is
low
AV IN/HDMI cable connected,
but no video input
The satellite dish is not pointing
at the satellite.
No signal or weak signal
The satellite dish in not pointing
at the satellite
Signal is too strong
Satellite dish is too small
LNB noise factor too high
The LNB is faulty
The system is connected by
SCART cable and TV is not in AV
mode.
Battey is low
Action
Check to make sure power is on.
Charge meter with PSU/Charger
Check AV IN/HDMI cable connec-
tion, check AV source connection
and AV signal
Adjust the dish. Check the Signal
Level in the Antenna Setup Menu
Check the cable connections. LNB
and other equipment connected
between the LNB and the meter
and adjust the dish.
Adjust the dish.
Connect a signal attenuator to the
LNB input
Change to a larger dish
Change to an LNB with a lower
noise factor
Change the LNB
Check AV IN cable connection,
check AV source connection and
signal
Charge meter with PSU/Charger
17
Advertisement
